This chapter provides information about:
• The MultiNet documentation set
• Available online help for MultiNet
The MultiNet documentation set consists of the following publications:
|
MultiNet for OpenVMS Consolidated Release Notes |
Describes new features in the software, known restrictions or problems, and corrections to the published MultiNet for OpenVMS documentation. Review the file SYS$HELP:MULTINET054.RELEASE_NOTES after installing the software. The same information is also available on CD-ROM distributions in PostScript format ([MULTINET054]MULTINET_RELEASE_ NOTES.PS), in ASCII format ([MULTINET054]MULTINET_RELEASE_ NOTES.TXT) |
|
MultiNet for OpenVMS User’s Guide |
Explains how to explore your network, send and receive electronic mail, log into a remote system, transfer files between systems, and use DECwindows with MultiNet. Includes user command references and the MultiNet Master Index. |
|
MultiNet for OpenVMS Installation and Administrator’s Guide |
Explains how to install, configure, and manage MultiNet. |
|
MultiNet for OpenVMS Administrator’s Reference |
Identifies and describes MultiNet configuration and management commands. |
|
MultiNet for OpenVMS Messages, Logicals, and TCP/IP Services for DECnet Applications |
Lists MultiNet messages and provides trouble-shooting information as well as MultiNet logicals. Explains how to configure TCP/IP Services for DECnet Applications. |
|
MultiNet for OpenVMS Programmer’s Reference |
Describes the MultiNet programming interfaces. |
The following sections describe these documents.
This guide provides information about installing, configuring, and managing MultiNet.
Chapter 1 Installing and Upgrading MultiNet for OpenVMS
Chapter 2 Example Procedures
Chapter 3 Files That May be Added to Your System Disk
Chapter 4 Removing MultiNet for OpenVMS
Chapter 5 MultiNet Documentation and Online Help
Chapter 6 Introduction to MultiNet and TCP/IP Concepts
Chapter 7 Devices, Protocols, and MultiNet Internals
Chapter 8 Getting Additional Information
Chapter 9 Configuration Overview
Chapter 10 Host Table and DNS
Chapter 11 Establishing IP Connectivity
Chapter 12 Configuring MultiNet Services
Chapter 13 Configuring Network Routing
Chapter 14 Network Time3 Protocol (NTP)
Chapter 15 Configuring Electronic Mail
Chapter 16 Printer Configuration
Chapter 17 RMT Server and Client Configuration
Chapter 18 Configuring and Managing FTP
Chapter 19 DHCP Client
Chapter 20 Configuring the Font Server
Chapter 21 Configuring Remote Systems with RARP, BOOTP, and DHCP
Chapter 22 Managing the XDM Server
Chapter 23 Configuring the MultiNet SNMP Services
Chapter 24 Configuring MultiNet Kerberos Authentication Service
Chapter 25 X11-Gateway Configuration
Chapter 26 Configuring DECnet-over-IP Circuits
Chapter 27 Configuring the MultiNet NFS Server
Chapter 28 MultiNet NFS v3 Servert
Chapter 29 Using the NFS Client
Chapter 30 Configuring the Secure Shell (SSH) v1 Server
Chapter 31 Configuring the Secure Shell (SSH) v2 Server
Chapter 32 Configuring IPSEC and SETKEY
Chapter 33 Intrusion Prevention System
Chapter 34 Using MultiNet for an OpenVMS Cluster Interconnect
Appendix A Server Configuration Parameters
Appendix B DNSSEC
This manual contains descriptions of all administrative commands.
Chapter 1 MultiNet DCL Command Reference
Chapter 2 DECNET-CONFIG Command Reference
Chapter 3 MAIL-CONFIG Command Reference
Chapter 4 NET-CONFIG Command Reference
Chapter 5 NFS-CONFIG Command Reference
Chapter 6 NTYCP Command Reference
Chapter 7 ACCESS-CONFIG Commands
Chapter 8 PRINTER-CONFIG Command Reference
Chapter 9 SERVER-CONFIG Command Reference
This manual describes common messages, logicals, and information about TCP/IP Services for DECnet applications.
Chapter 1 Troubleshooting
Chapter 2 MultiNet Messages
Chapter 3 MultiNet Logicals
Chapter 4 Utility Return Codes
Chapter 5 Error Codes
Chapter 6 TCP/IP Services Introduction
Chapter 7 Configuring DECnet Application Services
Chapter 8 NOT-CONFIG Commands
This manual describes the MultiNet programming interfaces, and covers the following topics:
Chapter 1 MultiNet Programming Tutorial
Chapter 2 Socket Library Functions
Chapter 3 $QIO Interface
Chapter 4 SNMP Extensible Agent API Routines
Chapter 5 RPC Fundamentals
Chapter 6 Building Distributed Applications with RPC
Chapter 7 RPCGEN Compiler
Chapter 8 RPC RTL Management Routines
Chapter 9 RPC RTL Client Routines
Chapter 10 RPC RTL Port Mapper Routines
Chapter 11 RPC RTL Server Routines
Chapter 12 RPC RTL XDR Routines
Chapter 1 Exploring Your Network Environment
Chapter 2 Sending and Receiving Electronic Mail
Chapter 3 Using Kerberos Authentication
Chapter 4 Accessing Remote System with RSHELL, RLOGIN, and TELNET Utilities
Chapter 5 Remote File Access with the RCP, FTP, and TFTP Utilities
Chapter 6 Using DECwindows with MultiNet
Chapter 7 Accessing Remote Systems with the Secure Shell (SSH1) Utilities
Chapter 8 Accessing Remote Systems with the Secure Shell (SSH2) Utilities
Appendix A DCL User Commands
Appendix B FTP Command Reference
Appendix C TELNET Command Reference
Appendix D TFTP Command Reference
MultiNet Master Index
MultiNet provides an extensive set of online help topics available using the DCL prompt:
$ HELP MULTINET
MULTINET
MULTINET is a set of commands for maintaining the MultiNet network.
Format
MULTINET operation
Additional information available:
|
Parameters Books |
CERTTOOL |
CERTVIEW |
CHECK |
CMPCLIENT |
|
CONFIGURE |
DECODE |
DHCP_Info |
DIG |
DNS_Info |
|
DNSKEYGEN |
DNSSIGNER |
FINGER |
FONT |
FTP |
|
GATED_Info |
HOST_TABLE |
IPP |
IPSEC_Info |
Intrusion_Prevention_System |
|
KERBEROS |
LOAD |
Logical_Names |
LPRM |
NETCONTROL |
|
NFS_Info |
NFSDISMOUNT |
NFSMOUNT |
NSLOOKUP |
NSUPDATE |
|
PING |
PUBLICKEY_ASSISTANT |
RARP_Info |
RCP |
RDATE |
|
REMIND |
RPC_Info |
RLOGIN |
RMTALLOC |
RPCMOUNT_Info |
|
RPCPORTMAP_Info |
RPCSTATUS_Info |
R_Services_Info |
RSHELL |
RUSERS |
|
RWALL |
SCP |
SSH_CLIENT |
SSHADD |
SSHAGENT |
|
SSHKEYGEN |
TALK |
TCPDUMP |
TCPVIEW |
TELNET |
|
TFTP |
TFTP_Info |
TRACEROUTE |
UCXQIO_Info |
UNIX_Info |
|
WHOIS |
X11DEBUG |
Programming |
