MultiNet V5.3 Messages & Logicals Table of Contents

• Preface
  • Obtaining Customer Support
  • Before Contacting Customer Support
  • Sending Electronic Mail
  • Calling Customer Support
  • Contacting Customer Support by Fax
  • Obtaining Online Help
  • MultiNet Frequently Asked Questions List
  • Accessing the MultiNet Public Mailing List
  • Process Software World Wide Web Server
  • Obtaining Software Patches Over the Internet
  • Documentation Comments
• Troubleshooting
  • Problem Solving
  • Console Messages
  • Getting More Information About an Error
  • UNIX errno Message Values
  • MultiNet Error Messages
  • OpenVMS Error Values
• MultiNet Messages
  • Absurdly long client literal user=user host=host
  • accept_decnet: $ASSIGN error (status=vms_error_value)
  • accept_decnet: $TRNLNM error (status=vms_error_value)
  • accept_tcp: $ASSIGN error (status=vms_error_value)
  • accept_tcp: Error! Server port number is below 6000 (port)
  • accept_tcp: getpeername error (errno=errno_value)
  • accept_tcp: getsockname error (errno=errno_value)
  • accept_tcp: setsockopt error (errno=errno_value)
  • access denied
  • Access_File I/O error, VMS Status = hex_vms_error
  • append to folder failed
  • Authenticated user=user host=host
  • Auto-filing of INBOX messages not completed
  • %BACKUP-E-OPENOUT, error opening disk as output-RMS-E-CRE, ACP file create failed
  • Bad address (EFAULT)
  • Bad address-addressError-%MAIL-E-ERRACTRNS, error activating transport username
  • Bad instance: name-value
  • Bad name: name-value
  • Bad realm: name-value
  • BRTOOFAR, destination 000001D2 is too far for branch operand and got on 18, RMTDRIVER\ECOSET, eco level 1 already set
  • Buffer didn't grow: Saved_eof = n, eof = n
  • Buffer extend failed!
  • Buffer extend failed in read!
  • Buffer_Flush I/O error, VMS Status = vms_hex_error
  • Buffer incorrectly in bitmap; vbn=n
  • Buffer n incorrectly in bitmap
  • Buffer_Read I/O error, VMS Status = vms_hex_error
  • BYE host Fatal mailbox error: error message
  • Byte order is value
  • Can't build data connection: %MULTINET-F-ECONNREFUSED, Connection refused.
  • Can't create subscription database
  • Can't create subscription temporary file
  • Can't open database: error error_number
  • Can't resize free storage
  • Can't write subscription temporary file
  • Cannot connect to MR
  • cannot rename new empty folder list
  • cannot save old empty folder list
  • cannot update folder database
  • cannot write sequential mail
  • CLI-E-IMGNAME, image file filename
  • %CLI-F-SYNTAX, error parsing 'SNMP_HOST'-CLI-E-ENTNF, specified entity not found in command tables
  • Client NFS: Unknown attribute nn
  • Client not authorized to access server
  • CNXMAN, lost connection to host node
  • Command not understood: Lexical error.
  • command stream end of file while reading char user=user host=host
  • command stream end of file while reading line user=user host= host
  • Compiler bugcheck. Submit an SPR with a problem description.
  • complete_decnet: Inbound $QIO IOSB (status=vms_error_value)
  • complete_decnet: Outbound socket error (errno=errno_value)
  • complete_tcp: Inbound End Of File
  • complete_tcp: Inbound $QIO IOSB (status=vms_error_value)
  • complete_tcp: $QIOW IOSB Outbound Error (status=vms_error_value?)
  • complete_tcp: $QIOW Outbound Error (status=vms_error_value)
  • Connection refused
  • %COPY-E-OPENOUT, error opening name as output-RMS-F-DEV, error in device name or inappropriate device type for operation
  • Could not open alternate database name
  • could not remove old empty folder list
  • Couldn't create database multinet:kerberos_principal, code=17
  • Couldn't bind to control socket:%MULTINET-F-EADDRNOTAVAIL, Can't assign requested address
  • Couldn't create file
  • Couldn't create temp database temp_file: code
  • Couldn't get master key.
  • Couldn't read master key.
  • Couldn't store principal.instance; load aborted
  • Couldn't translate VMS error 828
  • Couldn't translate VMS error vms_hex_error
  • %CREATE-E-OPENOUT, error opening file as output-RMS-E-WLK, device currently write locked
  • %CREATE-E-READERR, error reading SYS$INPUT:.;-RMS-F-RER, file read error
  • Create_File I/O error, VMS Status = vms_hex_error
  • Create_File Write error, VMS Status = vms_hex_error
  • Cross-device link (EXDEV)
  • Database rename failed: error error_number
  • Date Invalid
  • %DCL-W-ACTIMAGE, error activating image MULTINET:COMPILE_HOST_TABLE-CLI-E-IMGNAME, image file filename
  • DCL-W-ACTIMAGE, error activating image MULTINET_TOPS_LIBRARY-CLI-E-IMAGEFNF, image file not found filename
  • %DCL-W-ACTIMAGE, error activating image MULTINET_VMS_SHAREABLE-CLI-E-IMGNAME, image file filename -SYSTEM-W-SYSVERDIF, system version mismatch; please relink
  • Deaccess I/O error, VMS Status = vms_hex_error
  • DECnet Connection is from server::user for server name
  • dectermport failed to find language, XOpenDisplay("") returned NULL%DECW-F-CANT_OPEN-DISPL, Can't open display
  • %DECW-I-ATTACHED, transport DECNET attached to its network%DECW-W-ATT_FAIL, failed to attach transport TCPIP
  • %DECW-I-ATTACHED, transport TCPIP attached to its network
  • %DECW-W-ATT_FAIL, failed to attach transport TCPIP
  • Delete_File I/O error, VMS Status = 0x800
  • %DIRECT-E-OPENIN, error opening directory *.*;* as input-RMS-E-PRV, insufficient privilege or file protection violation
  • Directory not empty (ENOTEMPTY)
  • Disk quota exceeded (EDQUOT)
  • %DISM-W-CANNOTDMT, NFSn: cannot be dismounted%SYSTEM-F-DEVNOTMOUNT, device is not mounted
  • Dispatcher: Bad Program #200006
  • Don't forget to do a 'KDB_UTIL load filename' to reload the database!
  • Duplicate DECnet mapping detected
  • Duplicate UID
  • Error 65
  • Error 84
  • Error attempting to change password.
  • ERROR: Couldn't create configuration fileMULTINET_ROOT:[MULTINET]NETWORK_DEVICES.CONFIGURATION
  • Error <error-number> writing to <filename>
  • Error getting packet filter information for <device>
  • Error getting packet filter logging params for <device>
  • Error opening <filename>
  • Error opening <filename> for output
  • Error parsing ’<filter-definition>’
  • Error: NULL token.
  • Error reading new password, password unchanged.
  • Error reading old password.
  • Error receiving startup banner from hostname
  • ERROR: sen can't $ASSIGN to FFI device:%SYSTEM-W-NOSUCHDEV, no such device available
  • Error: Service "nfs" not found
  • Error setting packet filter for <device>
  • Error setting packet filter logging params for <device>
  • Error updating Kerberos database
  • Error while deleting directory
  • Error while deleting mailfile
  • Error writing output file. Terminating.
  • ex0: transmit error=number<facility>
  • Excessive authentication failures host=host
  • Excessive login failures user=username host=host
  • Expiration time for filter is before start time.
  • EXT_SRVTAB: bad instance name: instance-argument
  • EXT_SRVTAB: couldn't get local realm
  • Extend_File I/O error, VMS Status = vms_hex_error
  • Fatal error user=user host=host mbx= mbx: error
  • File already accessed on channel.Drive is not mounted.
  • File exists (EEXIST)
  • Fill_In_File I/O error, VMS Status = vms_hex_error
  • Filter REPEAT keyword requires start and expiration times.
  • Folder can not be deleted
  • Folder context corrupt (uidvalidity was n, now m). Please reopen folder.
  • Folder has inferior folders
  • Folder timer too low
  • Generic error
  • Get_Buffer Unix error n
  • Incorrect old password.
  • Invalid, choose 0-65535
  • Invalid data file size received
  • Invalid domain literal after @
  • Invalid group mailbox list: address
  • Invalid mailbox list: address
  • Invalid start or expiration time for filter
  • I/O error (EIO)
  • Invoked as a type server
  • IP Connection is for server server_name from node[address]
  • Is a directory (EISDIR)
  • %JBC-E-SYMDEL, unexpected symbiont process termination
  • KDB_UTIL: Couldn't get master key.
  • KDB_UTIL: Unable to open filename
  • Kerberos Authentication failed: Can't decode authenticator (krb_rd_req)
  • KERBEROS DATABASE STASH: Couldn't read master key.
  • KERBEROS DATABASE STASH: Unable to open master key file
  • KERBEROS DATABASE STASH: Write I/O error on master key file
  • Kerberos db and cache init failed = error_number
  • Kerberos error: Bad Kerberos name format (kname_parse)
  • Kerberos error: error-message
  • Kerberos error on default value lookup, status found.
  • KERBEROS INIT: bad Kerberos instance format
  • KERBEROS INIT: bad Kerberos name format
  • KERBEROS INIT: bad Kerberos realm format
  • KERBEROS INIT: Generic error (get_inkt)
  • KERBEROS INIT: krb_get_lrealm failed
  • KERBEROS INIT: Password incorrect
  • KERBEROS INIT: Principal unknown (Kerberos)
  • KERBEROS INIT: Protocol error (get_inkt)
  • KERBEROS INIT: k_gethostname failed
  • KERBEROS LIST: can't find realm of ticket file: error_string
  • Kerberos rcmd failed: rcmd protocol failure
  • Kerberos realm realm-name error-message
  • key file truncated
  • krb_sendauth() failed: Principal unknown (Kerberos)
  • LIB$GET_EF failed for protocol
  • LICENSE-W-NOCOMB, multiple licenses could not be combined for MULTINET...
  • Line <linenumber> filter already expired, not loaded: ’<filter-definition>’
  • Line too long before authentication host=host
  • %LINK-F-NOLINKSTB, linker-generated symbol table file is illegal
  • Link_File I/O error, VMS Status = vms_hex_error
  • logical_name logical name not defined
  • Login failure user=user host=host
  • Login user=user host=host
  • %MAIL-E-ERRACTRNS, error activating transport IN%LIB-E-ACTIMAGE, error activating image image name
  • %MAIL-E-ERRACTRNS, error activating transport username
  • %MAIL-E-ERRACTRNS, error activating transport SMTP%LIB-E-ACTIMAGE, error activating image image_name
  • %MAIL-E-OPENIN, error opening file as input-RMS-F-PLV, unsupported prolog version
  • %MAIL-E-USERSPEC, invalid user specification address
  • %MULTINET-F-EAFNOSUPPORT, Address family not supported by protocol family
  • Message from user MULTINET on node dispatcher: bad program # 200006
  • Mismatch - try again
  • Missing address after comma
  • Missing command before authentication host=host
  • Missing or invalid host name after @
  • mk_req failed: Principal unknown (Kerberos)
  • %MNCHK-I-LOGVRFY, personal login command procedure does not use 'F$VERIFY(0)
  • %MNCHK-W-DBVERMISM, database file file . . . does not match global section file version n
  • %MNCHK-W-DUPPHA, LAN adapters _dev_n: and _dev_n: both using physical address address
  • %MNCHK-W-NOROOTNS, no root nameservers are reachable
  • Modify_Attributes, don't have write access
  • Modify_Attributes I/O error, VMS Status = vms_hex_error
  • More than 40 found . . .
  • mount: access denied for client_name
  • %MOUNT-F-CTRLERR, fatal controller error
  • %MOUNT-F-UNSAFE, drive unsafe
  • %MOUNT-F-VOLALRMNT, another volume of same label already mounted
  • %MULTINET-F-ECONNCLOSED, Connection closed
  • MULTINET-F-ECONNREFUSED, Connection refused
  • MULTINET-F-ECONNRESET, connection reset by peer
  • MULTINET-F-EHOSTUNREACH
  • %MULTINET-F-EHOSTUNREACH, No route to host
  • %MULTINET-W-ENOBUFS, No buffer space available
  • %MULTINET-F-ERREADFLAGS, error reading interface flags for device-MULTINET-F-ENXIO, No such device or address
  • %MULTINET-F-ETIMEDOUT, Connection timed out
  • %MULTINET-F-MTUERR, error setting MTU for sen-MULTINET-F-EBUSY, Mount device busy
  • %MULTINET-F-SETPORT, unable to connect VMS device device: to MultiNet kernel for sln
  • MULTINET-W-STARTUPERR, error starting ethernet device name
  • MultiNet Printer Symbiont: Couldn't connect to host ip_addr port nnn
  • MultiNet Printer Symbiont: Error while waiting for ack of CF file:%SYSTEM-W-CANCEL, operation canceled, ABORTING PRINT JOB
  • MultiNet Printer Symbiont: Negative acknowledgement from IP_addrlpr queue not enabled (check printer type and printcap entry)
  • MultiNet Printer Symbiont: Negative acknowledgement waiting for ack of remote printer specification.
  • MultiNet Server: BootP: hardware address not found: address
  • MultiNet Server: Couldn't start RPCLOCKMGR, NFS/RPCLockmgr server not responding
  • MultiNet Server: $CREPRC failed, status = 39c
  • MultiNet Server: DHCP Control: DHCP server not starting; BOOTP service enabled.
  • MultiNet Server: Failure to create VMS print job = %XC
  • MultiNet Server: No Program to merge specified for server RPCLOCKMGR
  • Multinet Server: R_SERVICES: Bogus state dispatch, DCL still running
  • MultiNet Server: R_SERVICES: Couldn't create Mailbox (VMS error 2a14)
  • MultiNet Server: R_SERVICES: gethostbyaddr(ip_address) failed
  • MultiNet Server: R_SERVICES: I/O error %MULTINET-W-ECONNCLOSED, Connection closed
  • MultiNet Server: R_SERVICES: Socket read error%MULTINET-W-ECONNRESET, Connection reset by peer
  • MultiNet Server: Service FINGER pid nn failed: access violation, reason mask=!XB, virtual address=!XL, PC=!XL, PS
  • MultiNet Server: Service name pid nn failed: file specification syntax error
  • MultiNet Server: Unexpected Exception in MULTINET_SERVER process
  • MULTINET_SHOW: can't connect to mount server: RPC: Timed out
  • MULTINET_SHOW: No MultiNet Kernel
  • MULTINET_SHOW: Timed out. Resending... * * *MULTINET_SHOW: Timeout - SNMP Response not received from remote host
  • MultiNet SMTP Server: Failed to merge user written SMTP customizationimage: %LIB-E-KEYNOTFOU, key not found in tree
  • Must use comma to separate addresses: address
  • named: bad referral (’domain’ !<’domain’) from ’server’
  • named: Lame server on ’domain’ (in ’domain’?): [IP-Address].53 ’server’
  • net read: %MULTINET-F-ECONNRESET, Connection reset by peer [Aborting data transfer]
  • Net use failed (code 5).
  • New_File out of virtual memory.
  • New-mail timer too low
  • NFS 005F: Authentication failure.(A)bort, (R)etry or (I)gnore?
  • NFS SERVER: Couldn't allocate miniprocess
  • NFS SERVER: Couldn't create RPC transport
  • NFS SERVER: Couldn't create RPC transport stack
  • NFS SERVER: Error getting socket structure
  • NFS Server: Server/Kernel version mismatch
  • NFS Server: SVC_RECV failed
  • NFS Server: UDP SVC_RECV failed
  • NFS Server: Unexpected Exception in Kernel-Mode
  • NFS Server: Warning: writeback cache non-empty
  • %NFSDISMNT-F-DISMOUNTERR, Dismount Error
  • %NFSMOUNT-F-BADRPCTRANSPORT, couldn't create RPC transport to node-MULTINET-F-EACCES, Permission denied
  • %NFSMOUNT-F-BADRPCTRANSPORT, couldn't create RPC transport to <host>.%NFSMOUNT-F-RPCCREATEERROR, RPC Create Error: RPC: Program not registered.
  • %NFSMOUNT-F-BADRSIZE, Illegal NFS Read size specified
  • %NFSMOUNT-F-BADTIMEOUT, Illegal NFS Timeout value specified
  • %NFSMOUNT-F-BADWSIZE, Illegal NFS Write size specified
  • %NFSMOUNT-F-CANTLOAD, couldn't reload NFS UID translation table-SYSTEM-W-NONEXPR, nonexistent process.
  • %NFSMOUNT-F-MOUNTERR, Mount Error
  • %NFSMOUNT-F-NFSERR, NFS error-MULTINET-F-ESTALE, Stale file Handle
  • %NFSMOUNT-F-NOACCESS, access denied for mount_point
  • %NFSMOUNT-F-NOMOUNTRESPONSE, Mount server on "hostname" not responding
  • %NFSMOUNT-F-NONFSRESPONSE, NFS server on "TECHNO" not responding:RPC: Authentication error; why = Invalid client credential
  • %NFSMOUNT-F-NOREMOTEHOST, No remote host specified
  • %NFSMOUNT-I-MOUNTED, node::mount_point NFS mounted on mount_device
  • %NFSMOUNT-I-WAITDNS, waiting for the Domain Nameserver to start
  • %NFSMOUNT-W-NOPRIVMOUNTPORT, Not using privileged UDP port for MOUNT request
  • %NFSMOUNT-W-NOPRIVNFSPORT, Not using privileged UDP port for NFS request
  • nfs_read: Unexpected small buffer, fid (...)]
  • nfs_rename: channel 0; can't restart; context=n
  • No buffer space available (ENOBUFS)
  • No space left on device (ENOSPC)
  • No subscriptions
  • No such file or directory (ENOENT)
  • No tickets in file.
  • No tickets to destroy.
  • Non-authoritative answer:
  • Not a directory (ENOTDIR)
  • not an exported filesystem for name
  • <Not found>, Create [y] ?
  • Not owner (EPERM)
  • Null command before authentication host=host
  • Null passwords are not allowed; try again.
  • %NTYCP-E-NOADDR, no address information found for host name host-name
  • %NTYCP-E-NOSUCHNODE, address for host name host_name not found
  • %NTYCP-E-NOSUCHPORT, port number for service name service-name not found
  • %NTYCP-E-NOTINET, host name host-name does not have an IP address
  • %NTYCP-E-DEVNAMERR, syntax error in device name device-name
  • %NTYCP-E-PORTSYNTX, syntax error in TCP port name port-name
  • %NTYCP-E-PORTRNG, port number n is not in range low-high
  • %NTYCP-E-CREATERR, error creating network terminal device
  • %NTYCP-E-DELETERR, error deleting network terminal device device-name
  • %NTYCP-E-NOTNTY, device is not a network terminal
  • %NTYCP-S-CREPORT, device _NTYx: created to host ip-address, port port-number
  • %NTYCP-S-DELPORT, device _NTYx: deleted
  • %NTYCP-F-INTERNAL_ERROR, internal logic error in NTYCP
  • %NTYCP-F-CMDINITERR, error initializing command I/O routines
  • %NTYCP-W-CMDERR, error processing command input
  • %NTYCP-W-OPENCMD, error opening file file-spec for command input
  • %NTYCP-W-LOGDEFERR, error defining logical name
  • %NTYCP-W-PORTREQD, a TCP port name or number must be specified with /SERVICE or /PORT%NTYCP-W-NODEREQD, a node name or address must be specified with the /NODE qualifier
  • Opening DECnet Connection To node
  • Opening value connection to Node name, Server X_server
  • open_decnet: $ASSIGN error (status=vms_error_value?)
  • open_decnet: $QIOW error (status=vms_error_value?)
  • open_decnet: $QIOW IOSB error (status=vms_error_value?)
  • open_tcp: connect error (errno=errno_value)
  • open_tcp: setsockopt error (errno=errno_value)
  • open_tcp: socket error (errno=errno_value?)
  • open_tcp: Unable to resolve IP address for X server node node_name
  • Operation not supported on socket (EOPNOTSUPP)
  • Out of free storage
  • Pad: padding_amount Buf: buffer_size
  • Password NOT changed.
  • Permission denied (EACCES)
  • Printer Server: ansi_q: Recvjob lost connectionError in creating job number file
  • Printer Server: Failed to merge user written LPD Server image:%LIB-E-KEYNOTFOU, key not found in tree
  • Printer Server: Failed to merge user written LPD Server image:%RMS-F-RFA, invalid record's file address (RFA)
  • Probable bogus newsgroup list
  • protocol Event Flag is flag_value
  • (protocol) Event Flag Mask is mask_value
  • %PSM-E-OPENIN, error opening filename as inputRMS-F-DEV, error in device name or inappropriate device type for operation
  • %PSM-E-OPENIN, error opening SYS$LIBRARY:SYSDEVCTL.TLB as input-RMS-E-FNF, file not found
  • %PSM-E-READERR, error reading !AS-RMS-W-RTB, !UL byte record too large for user's buffer
  • %PSM-E-READERR, error reading print_file -RMS-W-RTB, nnn byte record too large for users buffer.
  • %PSM-E-WRITEERR, error writing !AS-SYSTEM-F-NOTPRINTED, failed to queue spool file for print
  • %PSM-E-WRITEERR, error writing !AS-SYSTEM-W-NOMSG, Message number 000081B0
  • %QUEMAN-F-OPENOUT, error opening queue_name as output-RMS-E-FLK, file currently locked by another user
  • %RCP-F-ERROR, message
  • Read only file system (EROFS)
  • %RMS-E-DNF, directory not found
  • %RMS-W-RTB, nnn byte record too large for user's buffer
  • %RMT-F-ALLOCERR, Error allocating RCD0 device-SYSTEM-F-INSFSPTS, insufficient SPTEs available
  • %RMT-I-REMINFO, Remote error code 34516,"%SYSTEM-F-NOMSG, Message number number"
  • RPC timed out server not responding
  • RPCMount: Refused RPCMount request from client_name not authorized
  • RPCMount: Rejected mount request from client_nameCouldn't get file handle for mount_point
  • RPCMount: Rejected mount request from client_namenon-AUTH_UNIX credentials
  • RPCMount: Rejected mount request from impostor client_nameName client_name doesn't map to address ip_addressRPCMount: Rejected mount request from client_nameunable to get hostname for ip_address
  • RPCMount: Rejected mount request from ip_address mount_point is not an exported filesystem
  • RPCMount: Rejected mount request from ip_addressmount_point is not an exported filesystem for client_name
  • se0: Transmit error (VMS Device Driver reported %X3c204c)
  • %SET-E-DEVOFFLINE "Device not in configuration"
  • %SET-E-NOMSG, Message number 1077808A
  • setsockopt(SO_RCVBUF): %SYSTEM-F-IVCHAN, invalid I/O channel
  • %SET-W-NOTSET error modifying nodeCLI-E-IVDEVTYPE invalid device type - specify a mailbox device
  • Signal caught, sig = signal code = sigtype old pc = program-counter exiting
  • Startup message, Debug level is value
  • Stale File System (ESTALE)
  • start_decnet: $QIOW error (status=vms_error_value)
  • start_tcp: $QIOW error (status=vms_error_value)
  • syslog: MultiNet Server: pausing for old server to write dump file and exit
  • %SYSMAN-I-NODERR, error returned from node name -SYSTEM-F-INSFMEM, insufficient dynamic memory
  • %SYSTEM-E-NORIGHTSDB, rights data base file not found
  • %SYSTEM-F-ACCVIO, access violation, reason mask=00, virtual address=00000000, PC=address, PSL=nnnnnnnn
  • %SYSTEM-F-ACCVIO, access violation, reason mask=00, virtual address=00000000, PC=address, PS=nnnnnnnn%TRACE-F-TRACEBACK, symbolic stack dump follows
  • %SYSTEM-F-ACCVIO, access violation, reason mask=04,virtual address=00003800,PC=000133ED,PSL=0BC00004
  • SYSTEM-F-BADVEC, invalid change mode or message vector
  • SYSTEM-F-FORCEDEXIT, forced exit of image or process by job controller
  • SYSTEM-F-IVDEVNAM, invalid device name-SHOW-W-OPENIN, error opening -name as input
  • %SYSTEM-F-NOLOGNAM, no logical name match
  • %SYSTEM-F-ILLIOFUNC ...
  • %SYSTEM-F-INTDIV, arithmetic trap, integer divide by zero at location
  • SYSTEM-F-VASFULL, virtual address space is full
  • tcp/ip remote startup error timeout occurred connection to node: nodename
  • Telnet: Out of space.
  • Text file busy (ETXTBSY)
  • There were more tuples found than there were space for
  • Tickets destroyed
  • Tickets NOT destroyed.
  • Too many open files (EMFILE)
  • %TPU-E-OPENOUT, error opening filename as output-RMS-E-PRV, insufficient privilege or file protection violation
  • Trying... [IP_address] %MULTINET-F-EACCES, Permission denied
  • %UCX-E-LPD_REQREJECT, Print request rejected by host%QMAN-I-INVSMBMSG, invalid data in message from symbiont on queue host
  • Unable to create scratch file to write message data
  • Unable to create TCP socket: error message Unable to init network channel
  • Unable to get local realm. Check MULTINET:KERBEROS.CONFIGURATION.
  • Unable to get peer name: error messageUnable to init network channel
  • Unchanged
  • Unexpected characters after address in group: address
  • Unexpected characters at end of address: address
  • Unexpected VMS error: SS$_EXQUOTA
  • Unknown character set
  • unparseable date field
  • Unterminated comment: string
  • Unterminated mailbox: address
  • User authorization failure
  • Warning: Message has unknown MIME version
  • Warning: Unexpected error 9 (ffff)Good Evening, xxxxxx.
  • X Toolkit Error: Can't Open display%DWT-F-DWTABORT, xtoolkit fatal error
  • %X11DEBUG-F-CONNECTFAIL, error connecting to address
  • X11DEBUG-F-NOSERVER, X11 Server n on address is not running
  • %X11DEBUG-F-REFUSED, X11 Server refused the connection-X11DEBUG-F-AUTHFAILED, authentication failure
  • %X11DEBUG-F-UNKNOWNHOST, unknown host XBOSTON-X11DEBUG-I-USERACTION, reissue the SET DISPLAY command
  • X11DEBUG-I-USERACTION, either the server is down-X11DEBUG-I-USERACTION, or the wrong server number was specified to SET DISPLAY
  • Xgateway: Configuration Error - value Logical Name Not Defined
  • Xgateway: Unable to resolve IP address for X server node hostname
  • Xgateway: IP socket call failed - errno=errno_value
  • Xgateway: IP setsockopt call failed - errno=errno_value
  • Xgateway: IP connection failed to node name server number- errno=errno_value
  • Xgateway: $ASSIGN to _NET: device error - VMS Status=vms_error_value
  • Xgateway: Cannot Open DECnet Channel to Node name Server number - VMS Status=vms_error_value*
  • Xgateway: Can't Open DECnet Channel to Node name Server number - VMS IOSB=vms_error_value*
• MultiNet Logicals
  • Chapter 4
• Utility Return Codes
  • PING Return Codes
  • RCP Return Codes
  • Chapter 5
• Error Codes
• Introduction
  • Databases
  • DECnet Application Services Considerations
  • Differences Between DECnet Application Services and DECnet
  • DNA and TCP/IP Protocols
• Configuring DECnet Application Services
  • Configuring DECnet application services
  • Using MENU-CONFIG
  • Modifying Your System Startup
  • Starting DECnet Application Services without Rebooting
  • Testing DECnet Application Services
  • Resolving Node Names
  • Name Mapping
  • Using DNS
  • Chapter 8
• NOT-CONFIG Commands
  • Command Summary
    • ADD NAME-MAPPING
    • ADD OBJECT
    • ADD PROXY
    • ATTACH
    • DELETE NAME
    • DELETE OBJECT
    • DELETE PROXY
    • EXIT
    • GET
    • HELP
    • NETCONTROL
    • PUSH
    • QUIT
    • RELOAD
    • SAVE
    • SET
    • SHOW
    • SPAWN
    • STATUS
    • USE
    • VERSION
    • WRITE